Re: [RCSE] carbon fiber push rods help

[WDJ8]

Use the yellow Sullivan cable housing.  I bend a stick pin to go through the 
control horn and slide the sharp end into the yellow cable, then the carbon 
goes in the other way.  Cut the tube about 3/4" long.  A couple of drops of 
thin CA will wick into the tupe.  Be careful the CA doesn't run down the rod 
and bond to the fuse!  The carbon rods I use are .30.
Tim
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]