In a message dated 12/16/99 11:22:12 AM Pacific Standard Time, Tuff puppy writes: << Funny how this all started with your comments about improving your Vortex's strength by adding a internal Kevlar D-tube structure into the leading edge. Great idea I hope it helps make it survive better in a crash like I experienced. >> Hi Dave. I don't want to create unnecessary friction here. But I have to stress the point that brushing past shrubs will not tear the wing apart... Unless maybe the wing became tangled in more than mere leafy green plants - Like a network of hard wood branches? I don't know I wasn't there. But Scott referred to a mild to moderate rap on the leading edge, so clearly it struck something or got caught on something much harder than green leaves. Again too, not to aggravate things, but I recall you telling me you were going atleast 100 mph... The effect of such energy at these speeds will increase damage dramatically. I've never had an airplane (foamless molded or otherwise) tear apart without sufficient force and speed. Lastly, the original laminate structure was very strong, and I always make posts to the exchange when I make any improvements. And I understand the frustration of losing an expensive airplane... But to expect it to survive any impact (or at least impacts associated with such high speeds) is just plain ridiculous. Sometimes though I've walked away from high speed crashes almost purley thru luck. My point is at high speed, it becomes soley a luck issue. See Ya, Steve RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

