If I turn a standard cloth 45 degrees I am supposed to be able to add some to the strength. So using Kevlar or glass in a round boom approximately how much have I changed it by turning and cutting the fabric at 45 degrees. When I broke it because the ground came up and smacked it it was interesting to note that in the straight direction (not 45 degrees) the break was a nice little ring around the whole fuselage boom. So I kept what I had and added more fabric at the points where I had proven it was needed by this stress testing. I think I could either make it much stronger or use a layer or two less if I cut the fabric at 45 degrees. This of course assumes the fabric is the same in both directions. Thankyou. Rick RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

