|
couple of things on this plane I never seen on planes,
they routed the antenna wire from the factory down the fuse
and up and out the fin, just had to solder my RX in, nice!
there's a rib next to each servo bay connecting top and bottom skins.
stab sits high on fin, whatever they use for a bell crank
it only takes a short servo horn to get long throws.
mine are to long as seen in pics.
details and pics;
now for the flying;
I got in around 15 launch's with mine today, I LOVE IT!!!!!!
one word, PRECISE! it's the most precise plane I've ever flown.
these where first flights too.
also response to camber better then any plane I've flown.
I pulled a ton of camber, up elevator, and spun it on a wing tip,
trying to tip stall
it and couldn't.
I can't believe how tight a thermal turn it will make, thought I
needed
big polyhedral to do this. :-)
launch's, I've never seen a plane zoom this high of my standard
winch, I can't wait to get it on mono, it's going to be crazy.
not a hint of flex anywhere on launch.
as far as speed, I never ballast it up, but diving and racing it
around
empty, it's faster then anything I've flown.
this was all with the 7.5 joiner.
looks like a hlg in the sky with those flat wings.
also when I got racing around, felt like I was flying my 60'' composite
Vindicator sloper, it response!
Yeah, i like it, alot!
(just thought i would share.)
Dave Hauch
www.git-r-built.com |
