|
Supra Enthusiasts,
Check out the latest failure mode shown on my web site (www.hilaunch.com) under photos. The beginning of the problem showed at Phoenix when the rear of the CF cap that holds the wing attachment nuts came loose. I applied a generous amount of epoxy, but that repair did not solve the problem. On a landing yesterday, the entire wing with the hold down bolts popped from the fuse. Fortunately the landing had been completed and there was no additional damage.
If you have a good idea about how to repair this problem, send me an email.
Don Richmond
San Diego, CA (Pensacola, FL today) [EMAIL PROTECTED] www.hilaunch.com |
- [RCSE] Supra #42 problem Hilaunch
- Re: [RCSE] Supra #42 problem inventorforhire
- RE: [RCSE] Supra #42 problem Tom Copp
- Re: [RCSE] Supra #42 problem Marta Zavala
- Re: [RCSE] Supra #42 problem Ben Wilson
- Re: [RCSE] Supra #42 problem Jim Laurel
- Re: [RCSE] Supra #42 problem Marta Zavala
- Re: [RCSE] Supra #42 problem Paul Emerson
- Re: [RCSE] Supra #42 problem Simon Van Leeuwen
- RE: [RCSE] Supra #42 problem Lex Mierop
- Re: [RCSE] Supra #42 problem mrmaserati

