Mike Smith wrote:
Dave, can't you just set up the Diff the way you want in the landing
mode? Diff is the only thing you are setting up right?
Mike
At 10:25 AM 5/22/2006, you wrote:
I'm setting up a D99 pylon racer and using an electron 6 receiver
wing type same as our open gliders. Everythings working properly but
when I go to set up diff for different modes the landing mode is
always on with the throttle stick in the down position. I went into
land menu and dialed it back from 95 to zero to eliminate land mode
but the throttle won't work. I tried it with my 777 receiver and it
works fine with the land mode disengaged. Any way to make it work with
the electron 6 or will I need 7 channels or more?
TIA
David
RCSE-List facilities provided by Model Airplane News. Send
"subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Please note that subscribe and unsubscribe messages must be sent in
text only format with MIME turned off. Email sent from web based
email such as Hotmail and AOL are generally NOT in text format
Hi Mike,
Problem is I want tons of diff in landing mode(both ailerons down to
slow it up)and a less diff in race and acro mode. The differnt modes
will be set up on the Launch, cruise and speed switch.
David
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
