At 05:53 PM 6/22/2006, you wrote:
Silicone II is the worst caulk I've ever used. (I got it free after
rebate at HD) I used it on my house in some places, and it took
forever to cure, did not smooth out well and was not very good. I
had to pull it all out. It came off easily in one long strip. I
went back to good old acrylic caulk and standard silicone.
I use goop for my servos. In planes with the servo area reinforced,
I just put packing tape around them, sand the tape a bit, put a
dollop of marine goop on and wiggle it in place. Great on carbon
and glass, but not for foam. For that, I just tape up the servo and
use two part liquid foam. A little goes a long way. Great for
holding control rods in the fuse also. You can get some at BP (Balsa Products)
http://www.bphobbies.com/view.asp?id=V907984&pid=U221687
Tom
I have no problem with Silicone for installing servos. I use a
strange new device called screws. :-). Sorry but I couldn't resist.
Chuck Anderson
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format