I am in need of a Tsunami left wing tip. I broke the joiner box on this tip. I have a yellow red tip but Im not picky.
At the Midsouth I was on my second flight of the day. Got up to the winch turned on wiggled everything. Put in the Launch Preset hooked up. When I threw the plane all I had was elevator and rudder. No flaps or Ailerons. Well to make it just a little worse since I was on launch all the servos went to neg reflex. I got off the line but it kept nosing over. I pushed it inverted and few a few curcuits around down wind. I could only establish a medium bank because the servos on the wing were not uniform. It hit pretty hard on the left tip. It Cracked the carbon joiner rod. As I was taking it apart I discovered the connector on the bottom of the wing was cocked off at about a 45 degree angle. It must have been loose in there and when I threw the plane it must have moved just enough to break contact. So now ya know why I need the tip. I have an e-mail into Bob at USASoaring and just waiting out a answer. Let me know Jeff RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
