Hey Don and Pat, my #16 Supra (standard construction) would not accept the
94761(12 mm) servos for the ailerons as they are too thick and protude below
the outside of the skin at the rear of of the servo opening. I used Volz Wing
Max (10 mm) for the ailerons. I have again looked at using the 94761 for
ailerons on my # 81 Supra (carbon) and the result is the same. the 94761 is
still thicker than the aileron opening by about 2.5 mm. Guess I'll use the wing
max again.
Comments ?
Regards, Dave Corven.
-------------- Original message ----------------------
From: [EMAIL PROTECTED]
>
> In a message dated 8/10/06 5:57:44 AM Pacific Daylight Time,
> [EMAIL PROTECTED] writes:
>
>
> Can anyone tell me if the Airtronics 94761 Wing Servos will fit for the
> Ailerons on a Supra?
>
>
>
>
> I have them in mine. They fit nicely
>
> Don Richmond
> San Diego, CA
> [EMAIL PROTECTED]
> www.hilaunch.com
--- Begin Message ---
In a message dated 8/10/06 5:57:44 AM Pacific Daylight Time,
[EMAIL PROTECTED] writes:
Can
anyone tell me if the Airtronics 94761 Wing Servos will fit for the Ailerons
on a Supra?
I have them in mine. They fit nicely
Don
Richmond San Diego,
CA [EMAIL PROTECTED] www.hilaunch.com
|
--- End Message ---