RE: [RCSE] Supra Servo Question - yes - it's a secret

[bgtwining]

I mounted 94761 servos on the ailerons of my Supra up against the spar with the lugs removed and glued them in. There might have been the slightest bulge in the cover, but you cannot see it now. On the flaps I used the same servos with the mounts that Skip Miller sells.   Bruce Twining   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Saturday, August 12, 2006 7:22 AM To: [EMAIL PROTECTED]; soaring@airage.com Cc: [EMAIL PROTECTED] Subject: Re: [RCSE] Supra Servo Question - yes - it's a secret   In a message dated 8/11/06 8:27:46 PM Pacific Daylight Time, [EMAIL PROTECTED] writes: . I have again looked at using the 94761 for ailerons on my # 81 Supra (carbon) and the result is the same. the 94761 is still thicker than the aileron opening by about 2.5 mm. Guess I'll use the wing max again. Comments ?     They work perfectly in my 'Ole #42.  I put them in 9 months ago, so I cannot remember if any modification was required.  I am sure it was slight if at all.  I remember the servo tight against the spar.   Don Richmond San Diego, CA [EMAIL PROTECTED] www.hilaunch.com