Wire? Doesn't matter. I've used a steel pushrod and the junky wire that was
laying in my junk drawer. Just be sure the installation is flat, relatively
straight and of equal length to the stocker (~ 41 inches for 72Mhz). AND
that it will be able to handle whatever flex may occur. Also be darned
certain of your connection/joint.
Bill Swingle
Janesville, CA
----- Original Message -----
From: "Chris Rose" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, November 24, 2007 11:32 AM
Subject: [RCSE] Extending an Antenna
I want to put one of my DLG's antenna down the wing, and was wondering
what wire I should use to accomplish this? Also, what wire can I use
to extend a JR600 receiver as well, which is in my 3M?
Thanks
Chris
RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED] Please note
that subscribe and unsubscribe messages must be sent in text only format
with MIME turned off. Email sent from web based email such as Hotmail and
AOL are generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
