I bought a 2.4 9303 and installed an AR6200 in an Organic which has an all Kevlar nosecone. But it does not work. I put the main receiver in the nose with the antennas fore and aft and the remote receiver on the bottom of the fuse behind the tow hook with the antennas exiting the fuse through small holes so that the antennas were pointing left and right. The range is lousy.
I put an AR6100 in the nose of a DLG TabooGt (all carbon fuse) with the antennas sticking out the sides so it looks like a little catfish. The range was poor. So I extended the antennas by laying a piece of insulated wire along side the original antennas held with heat shrink so that the new wire was 31 mm longer than the original antennas. This gave me decent range and I've flown it successfully. But I don't like all that wire sticking out in the airflow. I'd like a better arrangement but can not think of one. Does anyone know of any successful installations in these planes? Or have suggestions? Thank you Robert Samuels ........ St. Louis _________________________________________________________________ i’m is proud to present Cause Effect, a series about real people making a difference. http://im.live.com/Messenger/IM/MTV/?source=text_Cause_Effect
