Keith, Last night I set up a molded eagle on the rds8000. I used the dual aileron setup as described in the manual on ch2 and ch6. Put the flaps on throttle (ch3) and aux2 (ch8). For the flaps, use c-mix1 MAS TH, SLV ch8, mix at about 75%. Set the EPA of ch8 at 0 for both ends (use the right upper switch to select aux2 hi <-> lo). Make sure that the slave flap goes the correct directiona. Use ch8 CENT to set the slave flap up position.
On Thu, May 1, 2008 at 7:10 AM, Mark Howard <[EMAIL PROTECTED]> wrote: > Keith, > > There is a 3 position switch that will set flaps and reflex. There is > also a provision for crow. There are 2 c-mixes that will mix any > channel to any channel. The c-mixes are on a switch so you get only > one at at a time. I'm thinking that you use a 100% throttle to flap > mix for what you want. I haven't done a sailplane on this radio but > I'm going to look into it. In the meantime you can get the manual > online: > http://www.airtronics.net/manual/RD8000Manual.pdf > > Mark > > > On Wed, Apr 30, 2008 at 9:02 PM, 1st2fly <[EMAIL PROTECTED]> wrote: > > Mark, > > > > Can you put a pre-selected amount of camber or flap on a switch with the > > RDS8000? How about crow on the throttle stick? I'd be happy if I could > > just get crow full time on the throttle (flap) stick! But I'd also settle > > for just flaps on the throttle stick. If it can do that, then that's all I > > need, since I only fly my gliders on the slope anymore. Not particularly > > interested in "launch" camber or other settings for TD work. I'm thinking > > of using this radio for my big, full house slopers (2 aileron, 2 flap, elev, > > rud). Do you think it would work okay for that? > > > > Keith > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
