Gordy, and gang, This is far from a biggie.I noticed that the bottom of my fuse was cracked under the stab I also noticed that this crack allowed the stab some movement. To do the, repair, remove the arms from the servos and slide the pushrods aft so that they clear the fuselage. Carefully you should be able to work a small piece, or pieces of glass through the access hole for the elevator horns. Using an artist, type brush work the cloth down to the bottom of the fuselage. Be careful not to glue the pushrods into the plane. If you smack the model hard on a dork landing check the stab mount. LJ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
