Craig;
You haven't specified what type of covering it is. If
it is Monokote I've been through this procedure many times before.
1) I start off by stripping off as much of the covering by hand.
2) Using a #11 exacto I pick as much as I can being careful not to
gouge the wood underneath.
3) Any stubborn areas I simply sand off with 100 grit dry.
____
Kurt
From: Craig Allen [mailto:[EMAIL PROTECTED]
Sent: Monday, August 18, 2008 10:02 AM
To: [email protected]
Subject: [RCSE] Removing old covering
I have some 40 year old covering to remove. Any suggestions on how?
Craig
