I have a used CR Climax that I purchased from someone through the
internet.  It came with two Cirrus CS-20 BB sub-micro servos with
Airtonics connectors.  I would like to clip the Airtronics connector and
splice on a Hitech connector.  The servo leads have one red wire (an end
wire) and two black wires (the center wire and the  other end wire)  The
wire color chart on the back of the package of one of my servo extension
wires indicates that the for Airtronics connectors, the red wire is the
positive lead, the center wire is the negative lead and the other end
wire is the signal lead.  The same chart indicates that for Hitech
connectors, red is positive, black is negative, and yellow is the
signal. 

Is it safe to clip the leads and splice on my Hitech extension using the
wire color chart as a guide? 

Thanks for any advice anyone might have regarding this matter.

Cliff

(I have really high expectations regarding the anticipated performance
of my CR Climax. It has a small sticker on the wing indicating that it
was flown in the 1999 IHLGF!  To me, that�s like buying a used car and
then finding out that it was raced in the Daytona 500!)
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to