For templates I use good ol' plywood.
1. Print the template on paper,
2. Cut it out with scissors,
3. Use 3M77 to stick the paper to the plywood,
4. Take the plywood to the band saw and cut around the paper,
5. Lightly sand the edges of the plywood to make it extra smooth.
Done. It's much more simple than using formica. Plus, if you make a mistake,
you've lost nearly nothing. If you want the template to be extra durable, use
thin CA on the edges.
Simple and takes only a few minutes. Sanding wood is much easier than formica.
Bill Swingle
[EMAIL PROTECTED]
Pleasanton, CA
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]