On Tue 28 Mar, CARL WALTHER wrote:
> Thanks Tord.  I really need all the help I can get on the design of the 
> cradle.

  I think there are two basic ways - either a central pylon with outriggers
  that support the gliders wings, or more common, a parallell bar system, with
  rear (or front) stops, so that the glider doesn't slip off, and most often 
  a locking device (if you think that's necessary - if no manouvres are planned
  the lock isn't essential, but flight never is exactly as planned, is it?).
  
  The cradle could be held to the tug's wing with rubber bands, or nylon bolts,
  or as in my proposal, being integral with the wing. Very important is
  which wing will stall first - are you flying the tug aircraft its wing
  must stall long after the glider, and vice versa! I guess it is possible
  to use both aircraft's controls simultaneously, but I wouldn't be the man to
  do it! The verticals in my design could be CF tubes, that slip into tubes
  in the wing, but as drawn they are simply spruce beams attached to reinforced 
  ribs in the wing!
  
  Usually a little sling (monofilament, or whatever) is hooked on the
  gliders hook and then around the servo arm, so that it is slightly
  downward visavi the sling. To release run the servo to its other 
  extreme end and voila - it flies! The tension on the sling with the
  servo in the down postion holds the glider firmly in place, till it's time
  to release!
  
  See attached drawing (JPEG!)
  
  I think Gabe's site (I think had a neat design) is myblimp.com ...
  
  Somewhere around the blimps is his glider beautiful cradle!
  
  (For those on the RCSE have to apply to me for a copy of the JPEG)
  
  Yours,

Tord,
Sweden

<URL:http://home.beseen.com/hobbies/jebbushell/tord/tord.htm>


-- 
If reply difficulties - use [EMAIL PROTECTED]

Tord S. Eriksson, Ovralidsg.25:5, S-422 47 Hisings Backa, Sweden


RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to