At 08:25 PM 3/27/00 -0800, you wrote:
>I have a (4) servoed Wizard D light with a Berg receiver and I am using a
>Vision with (8) model memory. I have had problems after recharge the
>batteries and applying power to the receiver with the transmitter already
>turned on, the servos go nuts and to full travel in opposite directions.
>The battery pack that I made uses (4) cells from a Radio Shack Nimh 9 volt
>pack. When I remove any (2) servos, the remaining (2) work normally. The
>also seems to work fine using plain nicad batteries. I haven't tried a (3)
>Nimh pack yet, but that will be the next thing I try. I haven't looked at
>the system current draw to see if there might be causing problem.
The NiMH cells from the 9V Radio Shack battery that I tested would not put
out enough current to run my system. Very high internal resistance.
Ralph Weaver "Science should not be deified
Fishers, IN at the expense of truth."
USA
My site http://members.home.net/rmw00
MTI products http://www.magtechinc.net
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]