I just got a new Futaba 8UAFS to replace my Super 7. I am wondering about what settings to use for my Renegade, which uses flaperons. Should I use the ACRO template or the GLID template? I'm using the ACRO template now, which provides me with elevator-flap mixing mixing, and I use the airbrake mixer for spoilerons (using the throttle). I have it pretty much set up the way it is on my Super 7. One thing I did change was to create my own mix for the E->F mix (rather then the built in one) so I could move the switch assignment over to the landing gear switch on the left side of the radio (normally its on the three position switch on the right side). Anyway.....is there any compelling reason to use the GLID template instead? Also, I have a clone pac memory module. The circuit board is a bit to long, so the dust cover will not fit over it. Does anyone see any problem with cutting down the board just enough so that the cover fits, or maybe even GOOPing the end of the board to the inside of the cover to stabilize it? ____________________________________________________________________________ Brett Jaffee: [EMAIL PROTECTED] Brett's Slope and Power Home Page: http://home.earthlink.net/~jaffee OnTheWay Quake 2 server utility: http://www.planetquake.com/ontheway The Unoffical Extra 300 Home Page: http://www.bayarea.net/~nathan/extra300/ ____________________________________________________________________________ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
