Assuming you dont' have ailerons, wouldn't it be similer to plug the rudder
servo into channel 1 (the aileron channel), and use elevon mix instead of
v-tail?
I don't know a huge amount about the Flash 5 (my friend has one), but one
problem I assume you will encounter with the method you are using is that
the aileron trim level will not work for the rudder (since, although the
aileron and rudder may be mixed, the trim isn't, or at least it shouldn't
be). You will have to use the rudder trim on the left stick. Using elevon
mix and the rudder servo plugged into channel 1 should solve that.
At 10:50 PM 5/20/00 -0500, Patrick Quarterman wrote:
>I have a V-tail Chrysalis and a Hitec Falsh 5 radio. I would like the right
>stick to be rudder & elevator instead of the left stick being rudder and
>the right stick elevator. I have turned on V-tail mix, added aileron to
>rudder mix, but the rudder mix is reversed. I can't get the movement correct.
>
>Can anyone give me some hints on how to do this correctly?
>
>Thanks
>
>Patrick Quarterman
>[EMAIL PROTECTED]
>
>RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
>
>
____________________________________________________________________________
Brett Jaffee: [EMAIL PROTECTED]
Brett's Slope and Power Home Page: http://home.earthlink.net/~jaffee
OnTheWay Quake 2 server utility: http://www.planetquake.com/ontheway
The Unoffical Extra 300 Home Page: http://www.bayarea.net/~nathan/extra300/
____________________________________________________________________________
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
