I still have a Zage EPP lying around, that I'll start building after my
Highlander, but since it are both foamies:
>I always cover my foamies with Oracover/Ultracover...
>Sand the strapping tape good and put on a good coat of 3M 77 I use about
3/4 heat setting >on the iron. Tack down the top and bottom completly
before you go for the smooth finish.
>lay the wing in the beds and iron/heat gun until it's nice and tight...
Do you put a coat of 3M77 only on the strapping tape, or only at the places
you'll tack it down, or everywhere ? If there's 3M77 everywhere, it seems
hard to stretch to me, but I've never tried it (I used the _red_ tape that
came with my Zagi 400 on that one, didn't know then it could be done with
Oracover ..)
Stefan.
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]