What is the recommended way to sand the LE of a flap or aileron? The kits I have had so far had me glue on a 3/32" piece of balsa and sand an angle. I got as close as I could but usually the face has a slight roundness to it. I guess I could have cut one surface back the correct amount and then glued on the strip which would have then been at the correct angle and flat. Of course, this also pertains to the sanding of the angles and the dihedral and poly breaks on RES ships. Is there a tool or method that you can use to maintain the correct angle during the entire sanding process and end up with a flat sanded surface? Dave RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
