Larry,
I bought some three-strand twisted wire from FMA.
I also made up some myself at minimal expense. I bought wire of the
appropriate gauge, fineness of inner strands, insulator thickness and
color, etc. I then took about 10 foot sections of each color, tied
them together in knot at one end and then clamped the knot in a vise.
The other ends were put in a drill which put the desired twist in the
wire. To set the twist, I then went down then length of twisted
leads with a heat gun.
Dick
============
>I want to get some high quality, three strand, twisted wire for a wing servo
>harness, does anyone have a source.
>
>Larry Scaramella
>5479 Pacifica Drive
>La Jolla, CA 92037
>
>(858) 581-3422
>(619) 807-1653 cell
>
>www.mauioceanfrontrental.com
>
>RCSE-List facilities provided by Model Airplane News. Send
>"subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Dr. Richard C. Williamson Phone: 781-981-7857
Room C-317 FAX: 781-981-0122
Lincoln Laboratory Email: [EMAIL PROTECTED]
Massachusetts Institute of Technology
244 Wood Street
Lexington, MA 02420-9108
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
