That's not what I meant! In most cases the Europeans can build a decent layup with 
enough spar strength. Where they fall down is in
design and weight.

"Dieter @ ShredAir" wrote:

> >Seriuosly...I do have a soft spot for American made and designed
> >sailplanes beating eurotrash (I sell them too!).
>
> True, there sure is a lot of molded trash out there. Extra care needs
> to be taken to make a molded plane light, yet strong. As I said
> before, getting'em shiny on the outside is easy.
>
> Here are a few points which destinguish a high-quality model from "trash:"
>
> 1.  The spar transects the inner skin and sandwich material and
> intimately connects the outer skins of upper and lower wing halfs
> without using excessive (=heavy) epoxy putty. This requires extremely
> precise spar construction, and very few manufacturers go to this
> trouble. Some slap in a loose-fitting spar between the inside-skins
> only, and fill the gaps with putty.
> Look at the detail shots of any of our F5B/F/J planes, and you see
> what I mean. Or better yet, if you're coming to Phoenix this weekend,
> look at one of the Stratoses, Ellipses, Escapes, Artemises, etc.
> there. Also, you can't miss my extreeeemely heavy (84 ounces) Scar,
> another plane sticking out above the trash heap.
>
> 2.  Using high-grade material and proper layup schedules. I'm no
> expert here, but I know that not all aramid (Kevlar) or glass or
> carbon fibers are created equal. I do know that cutting fabric "on
> the bias" costs more. At the very least, see if the servo pockets of
> thin wings are underlaid with carbon or that extra molded-in pockets
> are provided for servos.
>
> 3.  Properly curing the parts. The top planes are heat-tempered in
> the mold for 24 hours, then left in the mold to finish-cure for
> several days. This results in harder and stronger skins  and spars
> and more warp-resistant parts. Only a few top manufacturers go to
> this trouble; they also build spars as described above.
>
> Lookin' forward t' meet'n y'alls in Phoenix...
>
> Dieter Mahlein
> ShredAir, Inc.
> http://shredair.com
>
> RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
>"unsubscribe" requests to [EMAIL PROTECTED]

--
Sal DeFrancesco
Northeast Sailplane Products
948 Hercules Dr. Suite 12
Colchester, Vt. 05446
802-655-7700

Website: http://www.nesail.com


RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to