Hi Cockpit MM Pilots,
Here's what I've done to launch a wing-launch plane with a launch preset...
This will only work for a rudder/elevator plane, flaperons are whole-other ball of
servo-wires...
Plug the rudder in to the aileron on the RX (Channel 1), elevator into elevator
(channel 2).
Plug the three way switch into the flaps channel on the TX (for me a lefty I have the
three way switch on the right side, for you other folks you'll probably have to move
the 3-way switch to the left side).
Turn on the flaperon mix on the mix menu. Your rudder is now a flaperon! so when you
hit the flaps switch the rudder will deflect the specified amount. One direction on
the flap switch will be the correct direction (i.e. my rudder goes to the left when I
throw left handed). The other will be for when you opposite handed partner/buddy
wants to try throwing your plane!
Finally, turn on the flap compensation mix, this is where you get your elevator (up or
down depending on your plane's set-up)!
I would love to put a copy of this set-up on my website, but my back-ordered
Cockpit/PC interface cable hasn't arrived yet...
Thermals,
RED
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
