Gents, The following are coordinates and leading edge information from Richard Weil via the "Bender collection" and Chris Adams' web site, respectively. Chris' site is: http://www.scrollsander.com/NACA2R(1)12.jpg If anybody tries a RES model with this airfoil, please share the results with the RC Soaring Exchange! The coordinates below are slightly different than those in Chris' site! I believe that all of the models that were built in the '70's used the coordinates as shown in Chris' site. NACA 2R 12 100 0.26 90 1.747 80 3.264 70 4.701 60 6.018 50 7.095 40 7.812 30 8.019 20 7.496 15 6.839 10 5.853 7.5 5.17 5 4.297 2.5 3.103 1.25 2.242 0 0 1.25 -1.568 2.5 -2.167 5 -2.853 7.5 -3.27 10 -3.557 15 -3.861 20 -3.994 30 -3.981 40 -3.788 50 -3.485 60 -3.102 70 -2.629 80 -1.996 90 -1.143 100 0 The leading edge radius is 1.58, the slope of the leading edge through (0,0) is 0.131. I don't have Abbott and VonDoenhoff (sp?) at home. If my memory serves me, the slope of the leading edge figure defines the angle that the centerpoint of the leading edge radius is up and back from the (0,0) point. In this case the angle is the arctangent of 0.131 or 7.46 degrees. This means that the leading edge is not straight up at (0,0). I hope somebody will correct this paragraph if I am wrong! That's all for now. Blaine Beron-Rawdon Envision Design San Pedro, California http://members.home.net/evdesign/ RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

