Welcome to the club! I agree that the VR.1 knob is too sensitive for camber. Haven't found a good way to make it less sensitive. The only suggestion I can come up with is when you set up crow make sure to set channel 6 (flaps) to 100% and then limit throw with EPA for ch 6,7. This will make VR.1 less sensitive relative to the flap stick than leaving EPA at 100% and setting crow/ch 6 to less than 100%. The latest thing I heard from Hitec is that our friendly rep is fighting hard to get sailplane-related issues addressed for software updates. He estimated it will take at least six months as their engineers are working on other things, too. At this point he could not promise anything because "our problems do not affect 95% of other users". Reading between the lines, I can't help but wonder - why is it necessary for our rep to fight with his management for us? That's it - we are second class citizens for radio manufacturers! Thomas P.S. Thanks to everybody who responded to my earlier posts about this radio on 5/14/01 3:34 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote: > > Got a new Eclipse 7 from Hitec hoping it would be a good full house sailplane > radio as they advertised. I read the information on RCSE about launch and > reflex settings not using the full TE and I can live with that but I can't > get the camber to work right.� I can get it to camber OK using the VR1 knob > only if it goes only one click but I can't stop the flap travel distance. > They will travel way too far.� It's OK if you only go one click on the knob > but how can you do that while flying.� Going back to center I can stop the > ailerons from going above the centerline when I return the knob but not the > flaps so when you are flying you won't know exactly if the flaps are where > they should be.� That could be a major problem.� I talked to Hitec but Mike > was not much help.� He did not know much about gliders and glider flying. > > Help !! before I return the radio back to where I got it because it's not > much > good for full house gliders otherwise. > > Don Cleveland > Houston, TX RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
