On 21 May 2001, at 23:15, Pat McCleave wrote:

> Hi Gang,
> 
> I got my first little taste of the dark side this weekend as we were
> leaving the Midwest Slope Challenge, and now know I will need more.  I
> only managed a few good turns before either losing it or landing since
> conditions were not the greatest.  I kept saying I should get out my
> Fun-1 so I could get a little more energy built up before going over
> the back but my older and wiser brother kept offering his JW for me to
> use instead so I would not risk killing my new Fun-1.  I guess I will
> have to sneak away without him next time so he won't be able to stop
> me. hehehe.  I do not feel like I can say I have actually really DS'd
> yet since I never managed more than four circuits but at least  I
> found that it was easier to make the tight close in turns than it
> looks like on the videos. I will be out again soon and will get back
> with my progress.

once you feel/see/hear the kick as you punch through into the 
moving air for the first time you will know it each and every time 
you will also learn to see good and bad circuits and adjust to suit. 
It is a whole new and exciting world.

I strongly suggest you get CRRCsim. It has slope and DS. It is 
very good for learning to control the path of your circuits and for 
quicken your reactions for when the conditions are really ballistic. I 
am yet to fly my 60" racer on a real DS site as FMD blew up just 
after I got it. But I have DS'd my viper and somebody else's Mamba 
(both EPP) in places where I wouldn't want to DS a hard model.

http://groups.yahoo.com/group/crrcsim

Look through the archives of msgs you want the later version If you 
have the ripmax lead that plugs into the trainer socket/gameport 
then it will work with CRRCsim. If you only have a joystick then 
that will do even if it isn't perfect.

Ade

Ade

ICQ. 75653589
www.adesite.co.uk
ade.honda-mini.co.uk
www.mini-list.com
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to