In a message dated 6/8/01 12:22:49 PM Eastern Daylight Time, 
[EMAIL PROTECTED] writes:

<< 
 I am about to purchase a Sirius Pro Series Charger.  But I looked all
 over their site and couldn't find out if it just charged NiCd batteries,
 NiMH batteries, or both.  If someone could strait this out for me that
 would be great! >>

To all concerned, the Sirius Charge Pro Series manual says that you can 
charge 4 to 8 cells, 250 to 1000 mAH with the Transmitter cord and 3 to 6 
cells, 125 to 2000 mAH, with the Receiver cord. It also says it will charge 
both NiCad and NiMH Batteries. I have been using a 1200 mAh NiMH Rx pack in a 
2M full house ship for about 2 years. I charge this pack with both a 100 mAH 
Futaba wall wart and the Sirius Pro, depending on the time available. So far 
all is well. The Sirius Pro charges at a rate of 550 mAH on both the Rx & Tx 
cords. Hope this Helps. Rich
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to