[RCSE] Vison TX Problem

[Jim Porter]

Help!    The settings in my Airtronics Vision tx  4 aircraft Tx  have become unstable.   For example when I adjust the aircraft setup No 4, it makes changes, in aircraft setup No.1    On preparing my glider for flying the controls were all eratic and one flap was reversed. Previously I had progammed another aircraft on No. 2 where a flap servo was reversed, compared with No. 1   In order to check this out I set the Access level in No. 1 to zero ( to stop any setting changes taking place.) I then changed L Setup to No.4 followed by some changes to settings in No.4 I then re-loaded Aircraft setup No. 1 where I found changes had been made as the servos were not operation as programmed even though the access level was Zero. This was corrected by using the Zero Stick function after changing the Access level to 3.   I would like to know if anyone has experienced and found a solution to this problem.   Please ignore my previous garbled posting. It got away on me last night when I was exhaused after arriving home from a two-day F3J contest where I lost the first three rounds until I trying to make my  TX function correctly.  I now need to find a solution quickly so as not to restrict my flying season.   Jim Porter North Vancouver, BC