Here is how I've set up the spoilers on my RES ships (JR 8103 Tx): 1. Since it is RES, connect the rudder servo to the aileron channel and mix AILE->RUDD, RATE=100% SW=ON to control the rudder from the right stick. 2. Spoilers. One servo per spoiler. Pgm Mix 1: Mix SPOI->FLAP. INHibit pots 5,6,7. The Spoiler stick operates the spoilers on Channel 6 (flap) and Channel 7 (aux2) and you can adjust the travel and endpoint of each spoiler panel separately. There may be other (and/or better) way to do this, but this is what I've found works for me. It has been mentioned here that it may be advantageous (and possibly even legal) to actuate one spoiler panel with the rudder while turning. I may experiment with this later on. One way I imagine that this could be done is to mix right rudder with the right spoiler channel and left rudder with the left spoiler channel. It would be nice to be able to switch this on or off, but may not be possible with the 8103. Although, since I am mixing AILE->RUDD, I may be able to have the rudder/spoiler actuate only from the left stick and not the right stick, or vice_versa. A kludge, but workable. Ideas? Suggestions? Thanks, --Bill _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
