Have you carefully examined the linkage for any looseness or flex? If
you don't get rid of that it may not matter if you make the other
changes you were talking about. If you have it and eliminate it, maybe
you won't need any other changes. Try fixing the servo arm in place and
see if you still have slop. Maybe temporarily glue a stick from the horn
to a piece of tape on the wing, so that it is very firm. If you still
have as much slop, changing the servo won't help much. Also make sure
the servo is firmly in place, with no slop or flex.

Also, have you got it set up so the servo has close to its maximum throw
and any reduction of surface throw is mostly done with the linkages? Try
to get the pushrods as far out on the horns as you can, especially at
the surface end.

If you add glass, add it with the weave at a 45 degree angle.
Peter Williams wrote:
> 
> Hi Guys.
> 
>     I got just the slightest hint of flutter on my DLG today....it was windy
> however. I suspect the culprit was the outboard aileron. Just a slight buzz
> on one launch (and a good one If I say so myself).
> 
> So now some questions............
> 
snip
> 
> Best Regards
> 
>     Peter Williams
> 

-- 
Lincoln Ross
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to