After finally reading a couple of these, I agree with most everything guys
are saying.  But if you want to find the best foam product out there, Tower
Hobbies (ya, the monster) sells a two part mixed foam that's absolutely the
best out there, and it is a chemical cure, so no doughy spots.  Also, I use
a monoject syringe to inject it 10cc's at a time starting at the back and
working forward, there is a plug back there to stop rearward movement.  By
using 10cc at a time, injecting it controls the placement, and working
forward you, never end up exploding a fuse.

Marc

-----Original Message-----
From: Martin Usher [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 19, 2001 10:13 PM
To: [EMAIL PROTECTED]
Subject: Re: [RCSE] Stiffening up a flexiable fiberglass fuselage


>Has anyone ever tried stiffening up a flexiable or weak fiberglass
fuselage by squirting that expandable foam ( the kind you use on your
house to seal out leaks around windows, doors, etc.) down the inside
of the fuse?

I've done this on quite a lot of fuses with excellent results, so much so
that I use it on all my planes. It does tighten up the fuse and will help to
stop it from crushing. It also pins the control cables in place. It adds
minimal weight to the fuse because you only need a tiny amount to fill a
fuse. Its not without its drawbacks, though.

1) This stuff expands quite a lot. You have to provide it somewhere to
expand to. If you don't it will force itself into places you don't want. It
also has the potential to damage structures.

2) Its sticky. If it gets where you don't want it getting it off is going to
be a pain. (Also see #5)

3) Its abrasive. If it gets into things it shouldn't -- e.g. servos -- it
can damage them.

4) Its not a structural material. It can help to add strength but it can't
substitute for a proper structure. (Repair the fuse first, then stiffen it.)

5) It has the potential to create a mess in the workshop that dwarfs in
scale and scope anything most people have experienced.

Polyurethane foam isn't the best raw material for us. We can dream of the
day that we see an aerosol can of EPP on the hardware store shelves!

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to