Hope Santa's ready to help a MPX Profi 4000 TX newbie with some basic programming questions:
I've assigned the controls of a v-tail, motorized Silent Dream sailplane in a straight forward manner, with the spoiler operating off the left stick and the motor control operating off the right stick with a sticktop momentary on button. I've assigned the servos as follows: V-Tail Left assigned to V-Tail+ (with rudder, elevator and spoiler on) V-Tail Right assigned to V-Tail+ (with rudder, elevator and spoiler on) Aileron Left assigned to Butterfly (with aileron and spoiler on) Aileron Right assigned to Butterfly (with aileron and spoiler on) Spoiler assigned to Spoiler Trim Motor assigned to Motor Trim Question 1: Now that I've assigned the controls and servos and made basic throw and centering adjustments, how do I activate the various mixes e.g. V-Tail+, Butterfly, etc.? For example, when I pop the spoiler, I want the ailerons to go up and the elevator to go down. (This action should always be "on".) What specific adjustments do I have to do to make these things happen? Right now when I operate the spoiler stick only the spoiler servo moves. Question 2: When I look at the servo travel pages for V-Tail+, "throttle" is shown as "not active". How do I activate this so that when I turn on the motor, I can program in some down elevator? Thanks in advance for your help, Steve RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
