Hello everyone,
    I bought a PiCO-Control 400 Round ESC from Multiplex for my Wingo.  I
run it with 8 - 1400 mAh nicads on a standard 7.2 V s400 motor and a gearbox
of unknown ratio and an APC prop.  I get great climb outs and long (10-15
min. full throttle) with this plane.
    However, I have crashed a couple of times due to radio interference from
the power system.  I thought the problem would be solved when I installed 3
0.1 uF disk capacitors (on between leads, others from motor can to leads).
Unfortunately, it did no entirely solve the problem.  I still get either
motor hesitation (half or pulsed power at full throttle) or motor cutouts at
about 50-100 feet range.
    I tried changing from the original DADs receiver to a new Micro 555, but
the 555 had even more interference.
    Has anyone had this problem?  Any solutions?  This is a motor-mounted
ESC, is this the problem.  The previous owner used a conventional ESC with
(apparently) no problems.

Your help is always very appreciated.

Erik Alber
Portland Area Soaring Society  Vice President
"The Resin Head"
http://NuanceHLG.8k.com
Reply to: [EMAIL PROTECTED]
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to