wptasinski wrote:
> 
> I purchased my first R/C glider, a Zagi 3C, a few days ago and have a
> couple of questions that are not described in detail in the
> manual.
> 
> 1.  The manual states that standard or micro servos can be
> used.  My question is (since I have not yet purchased a
> radio), which are better?  Initially I though the micros
> would be more appropriate (since they are lighter and I
> would prefer a lighter plane), however if I end up having
> to add lead to the nose because it's too light up front I
> might as well use the cheaper standard servos.  In other
> words, will the plane ultimately be lighter with micros,
> and if so, by how much?

You want a Zagi to be as light as possible.  They fly better
when light.  Every ounce you can eliminate helps.

> 2.  The manual states that I should cover the entire wing
> with 3M 77 glue before applying the colored tape.  What
> benefit does this provide as the tape already has an
> adhesive?

Nothing really sticks to EPP foam, but 3M77 does.  Let the
3M77 dry completely before applying the tape.
 
> 3.  Should there not be a way to glue the two
> front carbon fiber spars together before glueing them into
> the wing?  I have heard reference to this in other EPP wing
> builds and I think that the two wing halves would be
> stronger if this were the case.

I suggest you join the Zagi list on Yahoo groups for advice.

> 4.  Does the Futaba 6XA radio have elevon mixing?  I was looking at
> the Hitec Flash5 but I hear the the Futaba's are better.

Get a Futaba.  I don't know about that model (I fly JR).

--
Andrew E. Mileski
Ottawa, Canada
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to