It's really not all that bad. The USA F5B team molds their models every 2 years. I have a couple of them.
they used to use the bagged wing as a male, but last year made the female molds from aluminum At 11:27 PM 1/11/02 -0500, Jason Werner wrote: >I'd like to add something to Tom's great post. I recently had the >opportunity to try to build my own molds with Tom Kiesling's design and Joe >W's excellent design help. I can give some real world costs and comments. >I decided to do Renshape molds to prototype a design. We made fiberglass >female molds that are decent...but not perfect on finish. > >First of all...stop right there and say no. The average...hell the above >average modeler has really no need to build molded wings. And trust me you >will enjoy flying so much more if you don't! > >Anyway...costs. > There are several costs. Materials, Polishing, cutting, design/CAD/CAM >work. > > The basic cost is material. It will range from $1000 for Renshape to >$3000+ for Aluminum. Some get by with using thinner material or a cheaper >one like MDF, but warping will kill your nice CNC cut mold. This will >require a several thousand dollar machinist table to straighten it! REN is >about the cheapest setup you can get. It iwll cost about $1000 for the 6 >pieces of 2inch thick REN for an unlimited wing. > > The next cost is lofting the wing and creating the cutter paths. This >could cost thousands, or nothing depending on your software! Expect $500 >minimum for a simple wing. > > Finally you get to cut! A decent machine shop will spend around 30 >hours of cutting time to get a good finish with minimal polish on REN, and >about 60 on Al. That will run around $2000 in the US...sometimes more or >less. > > And then (thought we were done) polishing. If you are lucky you will >get your friends and buds to spend hours and hours to polish it up. Expect >hours and hours and hours to polish AL, expect lots of time painting, >filling, polishing REN. Both take about the same amount of time. > > Once you have spent about $6000+ on the molds, you finally get to pull a >part. Of course you probably made male molds so expect another $400-500 on >the fiberglass molds. > >Is it worth it...yes and no. If you have access to European labor and >machining resources then you can figure 1/2 the costs from the US. > >Hopefully you might see a molded Mantis in your location in the future (no >not for sale from me). > >Jason Werner > >RCSE-List facilities provided by Model Airplane News. Send "subscribe" >and "unsubscribe" requests to [EMAIL PROTECTED] RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

