Using two servos for the ailerons will be interesting. Be sure to mix some aileron droop with up elevator to tighten the loops, sharpen the turns and improve inverted performance.
I can't say what will or won't fit but the servo sizes are available in several places on the web. Just measure and compare. I'd suggest putting them just behind the wing spar at a third of the way out from the fuse. But remember: It's a FOAMIE. Very little is critical. If you'll be combating, I'd suggest the HS-85MG for everything. If not, the plastic gear HS-85 would be fine. The HS-81 would work but is a bit weak for my personal tastes. Bill Swingle [EMAIL PROTECTED] Janesville, CA p.s. Keep your servo holes sharp and snug. No glue. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
