Hi Bob . The trouble may be a thing called a "MIller Intergrator" It's a part of the MP-8000 encoder and works with the RF deck to shape pulses. I just purchased a FMA Direct RF Deck on Ch-08 ( ham) and the accompanying paper work mentions how to reset the Integrator. Maybe someone here on the Exchange can give you a fuller explanation. The two little pots on the lower left side of the encoder adjust the Integrator. Best of luck & 73,
Pete Carr WW3O State College, PA TDY Charleston, WVA On Sun, 17 Mar 2002 19:30:50 -0700 Bob Pederson <[EMAIL PROTECTED]> writes: > Ok, I give up. This combination should work but I can't get my > servos > to stop jittering. The MP8000 is a negative going pulse modulation > (chan 29 FM) and the Berg 6 set up for Hitec/ Futaba (normal setup) > which is the same form of modulation. Do any of you MP8000 users > out > there know what I may be doing wrong? The Berg is new and I've > checked > out the transmitter and servos with a Hitec 555 RX - all works like > it > should. I've even tried making up a shift inverter that I found on > Cabi's MP8K site but that didn't work either(I also moved the jumper > on > the Berg to correspond to an Airtronics, positive going modulation). > Any advice would be appreciated > TIA > Bob Pederson > Ssoaring in Berthoud. > Rocky Mountain Soaring Assn. > > RCSE-List facilities provided by Model Airplane News. Send > "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
