I am trying to setup a Twin Jet on my Stylus with the 2A1FER-F5B wing type so I can use the throttle features of this setup. The only problem is I can't get the throttle to work with the speed control plugged in to channel one. The glider card manual says throttle is on channel 1. If I plug the speed control into any other channel the motors run. I have tried reversing the channel with no response.
If I plug the speed control into the flap channel #6, I can throttle the motors. The thing is I don't know if this is the correct channel to work with the built in motor/elevator mixes. When I look at the Center menu, I see there is no motor channel listed. This is curious. The speed control is the one that comes with the Twin Jet. I followed the directions with the speed control for initial hook-up, but no dice. What am I missing here? I have never been able to get the throttle to work when trying to setup a plane with this wing type. Jeff Naber RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
