I think it is 5:1 or 5 parts resin to 1 part hardener for a total of 6
parts. And, don't forget that some West hardners are 3:1.
.........bc ([EMAIL PROTECTED]
http://www.widomaker.com/~conk
Williamsburg, VA 23185
On Tue, 16 Apr 2002, Jeff Winder wrote:
> Let's clarify this with some numbers because I'm a little confused????
>
> I was under the assumption that the West system was a 5 part 'mix'
> therefore:
>
> if one part was 4 grams:
>
> then you would mix: 16 grams resin together with 4 grams of hardener for a
> total of 20 grams after being mixed???
>
>
> Is this correct???
>
> Jeff Winder
> Cincinnati, OH
>
>
> > -----Original Message-----
> > From: Steve Meyer [SMTP:[EMAIL PROTECTED]]
> > Sent: Tuesday, April 16, 2002 1:27 PM
> > To: Rick Van Clief; [EMAIL PROTECTED]
> > Subject: Re: [RCSE] Fun with epoxy
> >
> > Guess I live by the cliche', "If at first you don't succeed, then read
> > the directions".
> >
> > Duh, it was so simple. :-)
> >
> > Thanks Rick.
> >
> > Steve
> >
> >
> > On Tue, 16 Apr 2002 11:11:48 -0400
> > "Rick Van Clief" <[EMAIL PROTECTED]> wrote:
> > >Hi Steve,
> > >
> > >I have a can of 206 Hardener in my hand and it says, "5 parts 105
> > >Resin to 1
> > >part 206 Hardener by volume or weight measure." Hope this helps.
> > >
> > >Rick VC
> > >
> > RCSE-List facilities provided by Model Airplane News. Send "subscribe"
> > and "unsubscribe" requests to [EMAIL PROTECTED]
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
