I'm doing battle with a Futaba Super7 (Heli version), and it seems like it's 
all up hill.  Let me start by explaining what I need to, and would like to 
accomplish.

I have a 4chnl DLG (2 servos in the wing, full span ailerons).  I would like 
to have it set up so that the ailerons drop together like flaps as the 
throttle stick is moved down.  In addition, I would require some elevator 
compensation for that.

I would also like to have a launch mode/camber preset.  I may not need the 
launch preset, but I will definitely need the camber preset for thermalling.

I do have Don Edberg's book on programming the Super7, but I'm still not 
getting it figured out.  The airbrake mixing on the Super 7 makes the 
ailerons go UP instead of down.  To my knowledge, this can't be reversed (if 
I reversed the servos, then the aileron's would go the wrong way in a turn).

The flapperon function seems to link the "flapperons" to the chnl 6 rotary 
knob (above the throttle stick).  When you set them up, you can effectively 
get dual rates, and aileron movement along with "flap" movement... but it 
still doesn't fix the issue of it being controlled by the rotary knob.

I thought about running a PMIX, setting the master to the throttle stick, 
and the slave to chnl 1 or 6 (the aileron servos), but this only moves one 
aileron at a time, and it moves the aileron up if the throttle stick is up, 
down if the throttle stick is down.

Any help would be greatly appreciated.  I just know a bunch of people with 
decent transmitters are reading this and groaning, "Get a new tx!" but this 
is what I have to get me by until I can afford a good one.  Thanks in 
advance!

Jeff



_________________________________________________________________
Join the world�s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to