What's the problem?
I have a 642, and to use separate servos for ailerons, you have to enter
the setup mode by holding both program buttons down while turning on the
radio, and then select 'flaperons' I think. Then plug one aileron into
the aileron and one into the flap (ch6) and it should work. The manual is
pretty helpful and will tell you which servo (left/right) is which.
.........bc ([EMAIL PROTECTED]
http://www.widomaker.com/~conk
Williamsburg, VA 23185
On Thu, 3 Oct 2002 [EMAIL PROTECTED] wrote:
> In a message dated 10/3/2002 07:59:17 PM Eastern Daylight Time,
> SilverstineRandy writes:
>
>
> > Dear Sir;
> > I have an aileron electric sailplane with seperate servos servicing
> > each aileron. I was told that you may be able to simply instruct me on how
> > to best configure my XP 662. Thank you in advance.
> >
> > Respectfully,
> >
> > Randy
>
> Could anyone help this gentleman? I'm not familiar with the 622.
>
> Thanks,
>
> Glenn
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
