The connectors and cable sold by Dymond are very well priced. The connectors appear to be the same as those offered by Custom Electronics. I have used connectors from both sources successfully. Fred
-----Original Message----- From: Kevin Sheen [mailto:[EMAIL PROTECTED]] Sent: Sunday, December 08, 2002 7:45 PM To: Martin Cleary; [EMAIL PROTECTED] Subject: Re: [RCSE] Source for wire harness mtls Martin, check out: http://www.ncws.com/rcrock/connector.htm It should help, Kevin At 04:01 PM 12/8/2002 -0800, Martin Cleary wrote: >I'm a bit frustrated with the cost of wiring components via the local >dealer. I can appreciate the cost involved in a slow moving inventory...but >$6 for a 6 inch servo extension... >I'd like to make my own wiring harnesses. Is there a good source for bulk >connectors and the proper wire? Also, does it require a special crimper or >can they be effectively soldered? Thanks >Martin >btw-I do try to patronize local people for obvious reasons. As self >indulgent as this hobby is, I need to make best efforts to control the costs > >RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
