FMA has the best wire on the market, little else perhaps, but their 150 strand twisted wire is super conductive and available in stock 8 foot lengths or in bulk. It is effective 22 gauge and called powerline wire. It is, I believe, the highest strand count out there.
Endless Mountain Models [EMAIL PROTECTED] http://www.scalesoaring.net/EMM/rand.htm -----Original Message----- From: Jimmy D. Andrews [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 24, 2002 10:55 PM To: [EMAIL PROTECTED] Subject: Re: [RCSE] Another servo wire question Not in the US, but this company has it all. http://www.nessel-elektronik.de/h-fl__Kabel/h-fl__kabel.htm Jimmy ------------------------------- [EMAIL PROTECTED] wrote: > I still seem to be having problems locating a source pre-twisted heavy > gauge servo wire, so I have a question for you all: If you have some > typical non-twisted servo wire, with the 3 wires connected in a ribbon, is > it enough to just chuck up the wire as it is in a drill and twist it, or do > you have to seperate the individual wires before twisting them? > > I've always been under the impression that the wires had to be seperate so > they wrapped around eacy other, rather then remain being connected and > twisted in a corkscrew pattern. I've been reluctant to do this with the > joined/flat servo wire because it seems like the insulation could be > damanged when you try and seperate the individual wires. > > Merry Christmas all, > > Brett > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
