On my flaps, at least, I use masking tape. Never had it come loose on me. If you have a two or three piece wing, and you can get to the servo from the root, a lot of people say that you can take a long dowel and tap on the servo from the side, which will pop it free.
At 06:27 AM 2/22/03 -0800, gldr guy wrote: >I know this has been covered many times before, but how do some of you glue servos into a wing, yet be able to remove them without messing up wing? I use epoxy/microballoons but many times it is tough to remove servo. I think I remember some shrink tubing >servos first then gluing in, cutting tube to remove servos. Any one else use diffent methods? thanks, Walter >--- >GG > > >____________________________________________________________ >Get 25MB of email storage with Lycos Mail Plus! >Sign up today -- http://www.mail.lycos.com/brandPage.shtml?pageId=plus >RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
