Ah, and here it is... http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LNDTB4&P=G
Doesn't say what kind of gears it has though. At 02:44 PM 6/14/03 -0700, [EMAIL PROTECTED] wrote: >The Futaba servo is the 9650. It is now available from Tower and I'm sure >other outlets as well. Not as thin as the Hitec or Multiplex but will work >fine in all of our current wings. > >Darwin N. Barrie >Chandler AZ >----- Original Message ----- >From: <[EMAIL PROTECTED]> >To: "Tom Watson" <[EMAIL PROTECTED]>; "Soaring Exchange" ><[EMAIL PROTECTED]> >Sent: Saturday, June 14, 2003 2:34 PM >Subject: Re: [RCSE] Hitec 5125 wing servo? > > >> Just to complicate things further, I've heard that Futaba has a new >digital >> servo with side mounts coming out. Something around the size of the >> Airtronics 141. Anyone know anything about that? >> >> At 02:10 PM 6/14/03 -0700, Tom Watson wrote: >> >So, what's the experience thus far with the HS-5125 wing servo? The JR >> >DS168 looks very promising, but rare as hen's teeth these days. These >> >side-lugged servos will be so much easier to mount and I need something a >> >bit thinner for this project anyway. >> > >> >Tom >> > >> >RCSE-List facilities provided by Model Airplane News. Send "subscribe" >> and "unsubscribe" requests to [EMAIL PROTECTED] Please note >that >> subscribe and unsubscribe messages must be sent in text only format with >> MIME turned off. >> > >> >> RCSE-List facilities provided by Model Airplane News. Send "subscribe" >and "unsubscribe" requests to [EMAIL PROTECTED] Please note that >subscribe and unsubscribe messages must be sent in text only format with >MIME turned off. > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
