I didn't get any RSCE messages for that period. I did post what is copied below and just started getting responses today.
If I missed any I would like them. thanks for the replies I did get. Del Schier K1UHF -----Original Message----- From: Brian Chan [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 08, 2003 2:03 PM To: Del Schier, K1UHF; Soaring RSCE Subject: Re: [RCSE] Good epoxy? Bonding CF? At 8:38 AM -0400 7/7/03, Del Schier, K1UHF wrote: >Hello All, > >I have never had much luck with hobby or hardware store epoxies. They just >do not cure, bond or wet out properly compared to the Hexel Safe-T-poxy that >I once used with my full scale Long EZ airplane. I did not build the EZ but >I did many mods and repairs with excellent performance from that sticky >stuff. West System. Go to most boat builder supplies, they should have them. Get a good scale too to measure the correct portion. I have no problem with the hobby store epoxy, just when you get the mix wrong, is the only time they won't cure. Brian -- ------------------------------------------------------------------ * Brian Chan, AFDD Instrumentation Group * MS-215-2, US Army, Moffett Field, CA 94035-1000 * 650-604-0389, [EMAIL PROTECTED] ----------------------------------------------------------------- RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
