Here's
the site from Euromodell: http://www.euromodell.de/ (also in
English).
On
first sight, I didn't find an indication there for the CG. I also checked the
manual of my Mini-Ellipse, and there's a long explanation about CG and angle of
incidence, but it's in German and hard to translate.
In the
end, they advise to set the CG to 65mm with the elevator 1mm up-trim giving
the best general performance. The CG-range is from 62mm to
72mm.
Good
luck; it's a great plane. I still love mine (it's an electro) and I intend to
buy a pure glider-version sooner or later.
Stefan.
-----Oorspronkelijk bericht-----Hello,
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Verzonden: zondag 7 september 2003 4:37
Aan: [EMAIL PROTECTED]
Onderwerp: [RCSE] **** Mini elipse question
I am putting together a mini elipse, and was wondering if anyone knows where the CG is supposed to be. I bought it without any instruction sheet/s.
Or if you know of any website which has instructions (I already looked at gliderking.com), that will also be much appreciated.
Thank you in advance ...
Todd

